AEM 10 Toyota Corolla 1.8L 6.9HP Silver Cold Air Intake - aem41-1403C

Once again AEM is raising engineering standards with an all new series of innovative air intake systems. With a revolutionary ETI module and fully integrated design, we have eliminated the need to detune or stage an intake tube diameter as it crosses the MAF sensor. The sensor is electronically adjusted to read proper air density instead of using physical tube designs intended to “trick” the MAF reading. The result is bigger horsepower and torque gains. Most modern fuel injected cars use a Mass Air flow (MAF) sensor to determine the air flow rate into the engine and meter fuel according to input from the sensor. The relation between the voltage output of the sensor and mass air flow is adversely affected by a shift to a larger diameter intake tube because the airspeed is reduced. This causes the MAF sensor to “under report” air flow causing a lean condition at worst and a Check Engine Light at best. To accommodate MAF sensor reporting, many intake systems reduce the diameter of the intake tube near the MAF sensor to stock or near stock size because of the need to maintain the correct air speed for the sensor to report the correct flow rate to the ECU. AEM's ETI Intake System is an alternative design approach that allows the intake tube to maintain its diameter resulting in more air flow into the throttle body. The ETI Intake System allows AEM to tune an engine for even more power by avoiding any tube down-sizing that will reduce overall airflow and horsepower. Instead the ETI electronically communicates with the MAF sensor to ensure an accurate amount of fuel is being delivered even though the tube is larger in size than the stock system. This means the vehicle maintains the calibration as intended by the factory while enjoying the benefits of our custom designed aftermarket intake system. PartNumber : aem41-1403C Description : AEM Electronically Tuned Intake System Air Filter Color : Red Air Filter Height : 5.25 in (133 mm) Air Filter Large End Diameter : 6 in (152 mm) Air Filter Material : Non-woven Synthetic Air Filter Outlet Shape : Round California Restricted : Not legal for sale or use in California Clamp Material : Steel Clamp Style : Regular Clamps Included : 7 Color : Gunmetal Gray Couplers Included : Estimated HorsePower Gain : 6.9 HP @ 5700 RPM Horse Power Increase : 7 HP Intake Pipe Color / Finish : Gunmetal Gray Product Style : AEM Cold Air Intake System Replacement Filter : 21-202DK RPM : 5700 Weight : 7.6 lb (3.5 kg) Intake Pipe Material : Aluminum Title : AEM AEM-41-1403C AEM Electronically Tuned Intake System System Type : Cold Air Induction Color : Polished Mounting Hardware Included : Yes Product Box Height : 12.25 in (311 mm) Product Box Length : 20.25 in (514 mm) Product Box Width : 12.25 in (311 mm) Street Legal In All US States : No TUV Approved (Europe) : No Air Box Included : No Air Filter Outlet Length : 2.75 in (70 mm) Air Filter Outlet Width : 2.75 in (70 mm) Air Filter Washable : Yes Clamp Color/Finish : Natural Coupler Color/Finish : Not Applicable Intake Pipe Inlet Length : 24 in (610 mm) Intake Pipe Inlet Shape : Round Intake Pipe Inlet Width : 2.75 in (70 mm) Intake Pipe Outlet Length : 28.5 in (724 mm) Intake Pipe Outlet Shape : Round Intake Pipe Outlet Width : 2.75 in (70 mm) Mass Air Flow Sensor Adapter Included : Mass Air Flow Sensor Adapter Included When Required Oil Included : No Filter Oil Required Package Material : Paperboard Package Type : Box Warranty : Limited Lifetime Air Filter Height : 5.25 in. (133mm) Couplers Included : None Estimated Horse Power Gain : 6.9 HP @ 5700 RPM Filter Color : Red Filter Material : Non-woven Synthetic Item Weight : 7.6000 lbs. Product Box Height : 12.25 in. (311mm) Product Box Length : 20.25 in. (514mm) Product Box Width : 12.25 in. (311mm) Air Filter Element Washable : Yes Air Filter Oulet Length : 2.75 in. (70 mm) Air Filter Oulet Width : 2.75 in. (70 mm) Clamp Color : Natural Coupler Color : Not Applicable Intake Pipe Inlet Length : 24.00 in. (610 mm) Intake Pipe Inlet Width : 2.75 in. (70 mm) Intake Pipe Outlet Length : 28.50 in. (724 mm) Intake Pipe Outlet Width : 2.75 in. (70 mm) Mass Air Flow Sensor Included : Mass Air Flow Sensor Adapter Included When Required Street Legal : No Street Legal In All US States : No Clamp Quantity : 7 WARNING CA Proposition 65 : Yes WARNING CA Proposition 65 Message : WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov 2010-2011 Toyota Corolla Base L4.1798cc Air Intake Systems::Cold Air Intakes 2010-2011 Toyota Corolla LE L4.1798cc Air Intake Systems::Cold Air Intakes 2010-2011 Toyota Corolla S L4.1798cc Air Intake Systems::Cold Air Intakes 2010 Toyota Corolla XLE L4.1798cc Air Intake Systems::Cold Air Intakes